ND6x-8/ND6x-16
3-Inch High Frequency
NeodymiumTransducer
Key Features:
•
•
•
•
•
•
•
•
Extremely high acoustic output
Geometricallyoptimizedtitaniumdiaphragm
Very high sensitivity and reliability
500Hzminimumcrossoverfrequency
Compact, ruggedandlightweight
1.4" exit diameter
2.0” exit diameter with ADH-6 adapter
Die-castaluminumheatsink
General Description:
Technical Specifications:
The Electro-Voice ND6x is a world-class high-frequency
compression driver capable of extremely high acoustic output
over a wide frequency range.
ND6x-8
ND6x-16
16 ohms
14 ohms
10 ohms
Nominal Impedance:
Minimum Impedance: 7 ohms @ 6 kHz
DC Resistance: 4.5 ohms
Freq. Response: 500-20,000 Hz
8 ohms
Precise engineering, along with careful selection of materials
and advanced driver architecture, has resulted in a driver
that is ideally suited for the most demanding presentation of
high quality music and communications program.
Power Capacity: 50 Watts1, 100 Watts Cont. Prog.
Recommended 500 Hz or higher
Crossover :
Incorporating Electro-Voice’s exclusive Ring Mode
Decoupling (RMD) through all design phases has produced
drivers with unmatched accuracy while minimizing acoustic
resonances and time domain ringing throughout the driver
structure.
Nominal Efficiency: 28%
Sound Pressure Level2 : 115 dB, HP4020 Horn
(1 Watt @ 1 Meter) 113 dB, HP6040 Horn
111 dB, HP9041 Horn
The small size and weight-to-power ratio of the ND6x assures
easy installations where weight may be a concern. The 2.15
Tesla flux density provided by the Neodymium magnet
exceeds that of conventional drivers at a fraction of the size.
Throat Diameter: 1.38" (35mm)
Voice Coil Diameter: 3" (75 mm)
Voice Coil Wire: Pure Aluminum Ribbon
Diaphragm Construction: 0.04 mm Pure Titanium Dome and
Surround
A unique, geometrically optimized 3" titanium diaphragm,
consisting of a one-piece dome and suspension system gives
these drivers an ideal combination of superb high-frequency
response and resistance to fatigue.
Electrical Connection: Screw Terminals (Accepts a pair of
12GA Wires
Polarity: Positive Voltage to Positive Terminal
Produces a Positive Acoustic
Pressure
Integrated into the ND6x’s design is a finned aluminum
heatsink to increase power handling and reliability.
Flux Density: 2.15 Tesla
Net Weight (each): 5.5 lbs (2.5 kg)
Shipping Weight: 6.5 lbs (3.0 kg)
The ND6x is recommended for all large horn installations
where lower crossover points are required, such as cinema
applications
1 Power capacity per AES standard. Continuous pink noise, 500 - 5000 Hz with a 6 dB crest factor, 2 hours.
2 Sound Pressure measured on axis in the far field with 1 Watt input of band-limited pink noise from 1000 - 5000 Hz
and calculated to 1 Meter equivalent by inverse square law.
|
Electro Voice Microphone 660A User Manual
Electro Voice Speaker System Eliminator ii User Manual
Extron electronic Stereo Amplifier P 2 DA User Manual
FieldServer Computer Drive FS 8700 24 User Manual
Fisher Price Baby Jumper V0206 User Manual
Fisher Price Motorized Toy Car 74450 User Manual
GE Dishwasher GLD4408 User Manual
GE Mouse 98795 User Manual
GE Refrigerator 200D8074P039 User Manual
Gianni Industries Door EM 350 series User Manual